Polls

What is the best modern version of the 2002tii?

View Results

Loading ... Loading ...

1984 BMW 633csi Thermostat Removal E24 M30

Q
I have a 1984 633 csi. While trying to remove the thermostat housing to replace the thermostat, I broke the 1st bolt I tried. To make it easier to drill out, I thought it might be easier to remove the entire coolant housing from the engine and work on it on a workbench. My

Continue reading 1984 BMW 633csi Thermostat Removal E24 M30

BMW M54 6-cylinder Crankcase Ventilation (PCV) DIY – 325i 328i 330i 525i 530i X5 & Others

The Crankcase Ventilation System (also known as PCV, or Positive Crankcase Ventilation) on the BMW M54 6-cylinder engines consists of a number of ventilation hoses, an oil separator and check valve and an oil drain-back hose.  The system is well known to have problems with vacuum leaks due to hose and valve deterioration and cracking, as

Continue reading BMW M54 6-cylinder Crankcase Ventilation (PCV) DIY – 325i 328i 330i 525i 530i X5 & Others

2000 E46 BMW 328ci Rough Idle & Stiff Door Handle

Q
My name is Mike, I own a 2000 BMW 328ci my problem is that when ever my engine is cold it idles rough ie. rpms drop then rev up. I have brought this problem to BMW and they replaced my cold air idle control to the tune of a couple of hundred dollars. This

Continue reading 2000 E46 BMW 328ci Rough Idle & Stiff Door Handle

1990 BMW 325is E30 M20 Stumbles During Acceleration

Q
I recently begun having trouble when I accelerate in my 1990 325is. It stumbles during acceleration at speeds up to about 65 mph. I just replaced the oxygen sensor and fuel filter this weekend. The old sensor had about 51,000 miles on it. The spark plugs, distributor cap and rotor button only about 13,000.

Continue reading 1990 BMW 325is E30 M20 Stumbles During Acceleration

2001 BMW Z3 3.0L M54 Fault Codes

This answer is applicable for many BMWs in addition to the one listed below.

Q
I’m Having cold start-up idle issues.  I ran a scan, out of curiosity. The misses clear up after operating temp is reached and new plugs failed to clear up the problem. What I want to do is narrow down the component

Continue reading 2001 BMW Z3 3.0L M54 Fault Codes

BMW E36 M52 Sputtering During Acceleration

Q
My 97 328is has been sputtering during acceleration. As I’m cruising around 60 mph or so, and suddenly wish to accelerate, I get very sluggish response and sounds as if it’s sputtering, or choking, or misfiring. I have also begin to notice that same sound when I start the car in the morning – every morning

Continue reading BMW E36 M52 Sputtering During Acceleration

BMW 1995 BMW 740i Cooling System Leak – V8 M60 M62 (E31 E32 E34 E38 E39 X5)

Q
I recently replaced my water pump gasket and coolant tube seals. And found that I still have the same leak I originally started with around the large coolant tube seal. Could this be coming from a bad water pump or could it be a faulty installation. Please help.

A
I would say that there may

Continue reading BMW 1995 BMW 740i Cooling System Leak – V8 M60 M62 (E31 E32 E34 E38 E39 X5)

1977 BMW 630csi Stalls Out – E24 L-Jetronic

Q
My BMW stalls out after starting and running for a short time. What should fuel pressure be and also fuel injectors best way to clean out. The car started up after I put fuel into the fuel intake through the hose and stall out when the car is idleing. Is it possible the fuel

Continue reading 1977 BMW 630csi Stalls Out – E24 L-Jetronic

BMW E90 E91 E92 E93 Cold Air Intake Kits & Sprint Booster – AFE

Q
car year: 2007
car model: 328xi Sedan
Hi I recently bought my first BMW, I’m loving the car but have been looking into a few things one being a cold air intake. I have been told that if I put the kit in the car it will get better gas mileage and of course increase power. I

Continue reading BMW E90 E91 E92 E93 Cold Air Intake Kits & Sprint Booster – AFE

BMW Rough Running & Stalling – M54 – Camshaft Sensor & MAF Cleaning

This answer is applicable for many BMWs in addition to the one listed below.

Q
car year: 2002
car model: 325i
Hello, I have the Bav-auto Fault Code Reader and reset tool. I have fault codes 08 and 41. The camshaft sensor is on order but the mass air flow sensor only came on after cleaning my K &

Continue reading BMW Rough Running & Stalling – M54 – Camshaft Sensor & MAF Cleaning